Sick Inductive proximity sensors are commonly using in non-contact detection industrial application for metallic objects. zThey based on a coil and oscillator that creates an electromagnetic field in the close surroundings of the sensing surface.
Sick standard series Inductive sensor with DC 3-wire & Flush
Sick standard series Inductive sensor with DC 3-wire & Flush
- High switching frequency
- Short-circuit protection (pulsed)
- Robust brass housing, nickel plated with fine thread M8 x 1 mm
- Enclosure rating IP67
Available model:
IM08-1B5NO-ZW1 | IM08-1B5PS-ZW1 | IM08-1B5PS-ZT1 |
IM08-1B5NS-ZW1 | IM08-1B5NS-ZT1 | IM08-1B5NS-ZC1 |
IM08-1B5PO-ZW1 | IM08-1B5PO-ZT1 | IM08-1B5PS-ZC1 |
Sensing range: 1.5mm
Electrical configuration: DC3-wire
Supply voltage: DC10... 30V
Ripple Upp: ≤10%
Voltage drop Ud: ≤1.2V
Power consumption: ≤20mA2
Continuous current: ≤200 mA
Time delay before availability: ≤100 ms
EMC According to EN60947-5-2
Switching output: NPN / PNP
Output function: Normally closed / Normally open
Installation Flush
Connectiontype Cable, PVC,2 m
Connector, M12, 4-pin
Connector, M8, 3-pin
Enclosure rating: IP67
Max. switching frequency: 3,000Hz
Dimension:s M8
Short-circuit protection: YES
Reverse polarity protection: YES
Power-up pulse suppression: YES
Shock/vibration stress: 30g, 11ms/10 ... 55Hz, 1mm
Ambient temperature Ta: -25 °C... +70 °C
Housing material: Brass nickel-plated, plastic
Sick IM08 Inductive Sensor (Sensing range 1.5mm)
- Brand: Sick
- Product Code: Sick IM08 Inductive Sensor
Tags: sick, im08, inductive, sensor, (sensing, range, 1.5mm)